To ensure everyone has the same firmware please right click on the following link and save target to a preformatted SD/MMC card as per the instructions below.

Super Ultimate Firmware Update 16/10/2007 Click Here

In this update we have not just included more support for what we call "confused midi file structure", relates to the pause function!

Directory Support! You can now create midi music folders! Each folder can store up to 255 files and the number of files is only limited by the size of your memory card! So you can now store and play thousands on one one card!

Create folders as normal (On your card or on you PC then copy to card).
To navigate the folders use the up or down button and to enter a folder press the right button.
.. <DIR> will be displayed showing you are now in the directory.
Use the Up or Down Button to scroll through your midi files, then press play etc.

To exit a folder and take you back to the root, press the left button after you have stopped playing the file.

We have also remapped some buttons and relegated Transpose to shift function (Two button operation required) In its place you now have a single button skip feature while playing by just pressing Up or Down. Holding either button will fast skip!

Midi file names over 24 characters long now scroll in on the LCD and will display up to 64 characters!

REC is now a Shift button that you will hold down whilst pressing other buttons to do the following:

REC+UP or DOWN=Transpose up or Down
REC+RIGHT=Toggle Lyrics

Midi Monitor has been removed in this version to allow the other features and has been replaced with a midi activity indicator..

We also have another upgrade that includes midi monitor and a few more extras, but this requires a chip upgrade!
Return to base Service upgrade is available at an extra cost. Details will be published soon showing other features.

Preparing the SD—MMC Memory Card (All capacities are ok, 32Mb, 64, 128, 256, 512, 1Gb and 2Gb)

1. Insert an SD Memory into your computers card reader or card slot (Marked SD/MMC).
2. Using Windows Explorer (Right click on the Start button and Select Explorer) You should see the card as another drive letter or called MMC—SD (Drive Letter).
3. Right click on the card and select Format… A window will open Saying Format MMC – SD.
4. Change the File System option to FAT (It may say FAT16, but it means the same thing).
5. Next, click the Start button in the box. A warning box will open!
6. CAUTION! MAKE SURE YOU ARE ONLY FORMATTING THE MMC—SD ITEM!
7. Click OK and in a second another little box will open saying format Complete. Click OK.
8. Right click on the "Right Click Here" link and left click on "Save Target as "
9. Left Click the "Save in" drop down menu box and select you SD/MMC card.
10. Click OK
11. Download Complete box confirms it has downloaded, Left Click CLOSE (Do Not Open)

Software Updates and Procedures:
Before updating please ensure the battery is good and you are using a quality memory card.

1. Insert the card into the SD Midi Controller unit an power on. Update takes less than a second.
2. Writing page #... will be seen on the LCD.
3. Done! Toggle Power will confirm a successful update.
4. Switch off and remove card. Software update is now complete.

If the update sticks on a number this will down to a card error and the unit may be inoperable. A return to base will be required!

As with Microsoft updates we can not accept any responsibility for an update failure, please use at your own risk.

We are also aware that there are a millions of fake branded SD/MMC cards on the market today and these cards are not reliable!
If you are unsure of your card, please send a picture of it to the manufacture and you may be surprised with their reply!